Victory V130 The Super Countess Guitar Amplifier

Victory Amplification Heritage Series, Made in the UK, Handmade High Quality Boutique Tube Head, Extremely Versatile, 2 Channels with 4 Modes: V30 The Countess, V40 The Duchess, Sheriff 44 and VX The Kraken in One! Power 100W/30W, Separate Master Volumes, 4x 6L6 Power Amp Tubes, External Bias Adjustment, 3-Band EQ, Series Effects Loop, Includes 1-Button Footswitch, Includes Slip Cover
  • Helsinki Store In stock
  • Warehouse Ask for availability
Including vat 24%

Victory V130 The Super Countess offers staggering versatility with enough all-tube power for any stage. Evolved from V30 The Countess model, upscaled in power, and adding shades of V40, The Sheriff 44 & VX The Kraken, this amp allows you to unleash your creative powers!

With the V30 The Countess, players will find the massive clean headroom and heavy overdrive that they love… and then some. Victory also added two modes in between: one for V40- and Sheriff-style pushed clean and classic drives; the other for channel 1 Kraken-derived gain. The four 6L6 valve power section can also be switched from 100 to 30 watts for even more tonal flexibility. All clean, all gain, effortless power.

Four Channel Modes
​V30 The Countess has two channels: very high headroom clean and very heavy overdrive (just as Guthrie Govan wanted it). In V130 we've added two modes in between. The Clean channel gets a 'crunch' mode for light breakup and classic overdrive that's reminiscent of sounds in V40 and The Sheriff 44. The Overdrive channel's extra mode is Voice I, derived from channel 1 of VX The Kraken with the input of Rabea Massaad. They're all footswitchable.

Masters For Each Channel​
Balancing your cleaner and gained sounds is often a challenge, especially in a band context. With V130's massive headroom, the channel masters give you the control you need to make sure all your tones are heard loud and clear. People have asked why the tone controls are common to all modes: our answer is that the EQ is optimised to work across the range. Get it balanced to your chosen cab – not too much, not too little – and V130 stays poised across all modes.

Series Effects Loop​
A series effects loop sits between pre and power sections for whatever pedals you want to put in there. We find that modern digital delays and reverbs can sound cleaner in the loop, while more traditional analogue delays, modulations and so on sound great straight into the front of the amp. The only 'right' way is the one that sounds best to you.

100 Or 30 Watts​
100 watts of 6L6 power section can be eye-poppingly loud if you want it. But it's not just about volume: V130's high-headroom abilities give you clarity and massive dynamic range right across the loudness spectrum. It's a feel and response that many players love. You can also switch down to 30 watts for a less bold feel, lower volume and more power-stage 'give'.

External Bias Adjustment​
Take all the hassle out of replacing output valves with the V130's external bias measurement points and adjustment. All you need is a new set of power valves and a multimeter. It's fast, safe and reliable – you can find full instructions are in the amp's manual.


  • Made in the UK
  • Power: 100/30W RMS
  • Power Tubes: 4x 6L6
  • Preamp Tubes: 4x 12AX7
  • Channels: 2
  • Controls (Front Panel): Clean Crunch On/Off, Overdrive Voice I/II, Clean Gain, Overdrive Gain, Bass, Middle, Treble, Channel Switch, Clean Master, Overdrive Master, High/Preheat/Low Switch
  • Controls (Rear Panel): FX Loop Bypass Switch, External Bias Adjustments
  • Inputs: 1x 6.3mm Instrument In, 1x Effects Loop Return, Footswitch: Overdrive Channel Voice I/II, Clean Channel Clean/Crunch
  • Outputs: 1x 6.3mm Effects Loop Send
  • Speaker Outputs: 5x 6.3mm Jack, 1x16 Ohm, 8Ohm (2x16 Ohm), 4 Ohm (2x8 Ohm)
  • Dimensions (WxDxH): 480 x 235 x 235mm
  • Weight: 12.5kg
  • Includes Footswitches for Channel/Mode Change
  • Includes Slip Cover
More Information