Mooer ShimVerb Pro digital reverb Efektipedaali
- Helsingin myymälä Varastossa
- Tukku Varastossa
- Turun myymälä Varastossa
Upeat ominaisuudet pienessä paketissa!
Shimverb Pro has the heritage of Shimverb. Moreover, we have made improvements on it. Shimverb Pro uses floating-point DSP chips, new hardware has giving out you a much wider space of development. We have been through countless days and nights of experiments and algorithm modifications. The result is to make significantly improvement on the Shimmer and the Reverb effects. Shimverb Pro assembles five reverb effects including Room,Hall,Church,Plate,Spring, giving you a different experience of sounds.
It is equipped with Decay knob which can adjust the room size for the reverb effect. Shimmer function adds a new feature------the combination of 5 switches and an Octave button, which creates a different effect and bring more excellent sound to your music. In addition, Shimverb Pro has separated Shimmer footswitch and Dry/Wet knob, Hi Cut/Low Cut function, stereo input and stereo output, all these new features are going to help you create a brand-new musical journey.
Functions: New algorithm, new technology, overall tone improvement Shimverb Pro provides 5 different Reverb effects, from Room to Spring.
Room: Simulate the Reverb effect in a room
Hall: Simulate the wide Reverb effect in a concert hall
Church: Simulate the Reverb effect in a Church
Plate: Simulate the Reverb effect of a vibrating plate
Spring: Simulate the Reverb effect of a vibrating Spring Adjustable Shimmer effect 5 Shimmer effects, can achieve +3,+4,+5,+7,+9 half-step modulation.
And the OCTAVE button can add another octave on those 5 Shimmer effects. Shimmer effect can be activated by a separated foot switch. The volume of the Shimmer effect could be adjusted by press down and hold the Shimmer footswitch and dial the Dry knob.* DRY and WET Knob DRY knob controls the volume of the guitar sound and the WET knob controls the volume of the reverb effect.
HI CUT and LOW CUT Knob These two knobs control the high and low frequency of the reverb effect.
Trail ON/OFF function Trail ON is the Buffer Bypass mode in which the reverb effect will be held even if you turn off the reverb effect. Trail Off is the True Bypass mode in which the reverb effect will be immediately stopped when you turn off the reverb effect.
Tone saving: To save your tone, simply press down two footswitches together and hold for 3 seconds or longer. To use your saved tone, simply press down two footswitches together again.
- DC 9V Adapter Current Draw:210mA
- Solid metal shell design Specification
- Input: Two 1/4 Jacks (Impedance: 1M Ohms) Output: Two 1/4 Jacks (Impedance: 100 Ohms)
- Sampling Rate: 44.1K Sampling Accuracy: 32bit
- Power Requirements: AC adapter 9V DC (center minus plug) Current Draw: 210mA
- Dimensions: 106mm x 96mm x 53mm
- Weight: 440g