Suhr MicroMIDI Control
- Helsingfors butik Fråga mer
- Lagerlokal Fråga mer
- Åbo butik Fråga mer
Suhr MicroMIDI Control is a MIDI controllable footswitch replacement, giving your amps with mechanical footswitches access to MIDI control. Amplifiers, pedals, or any device that has a footswitch, such as the Suhr PT15, or the Suhr Bella can gain the ability to switch amp channels, bypass amp reverb/boost, set delay tap tempos for pedals, and more.*
Easily control the two switches on the TRS jack using MIDI from your MIDI foot controller, your DAW, or other MIDI devices. The Suhr microMIDI Control can also allow you to add control jacks to basic MIDI switchers with no available control jacks.
Connect Any MIDI switching device
The microMIDI Control can accept either Program Change or Control Change commands and has the ability for momentary, latching, pulse switching, and pre-determined combinations of the two switches.
Connect to Any Amp or Pedal with Mechanical Switching
Optically isolated, preventing ground loops in systems whose switch control jacks aren’t isolated from the switcher. Latching (using CC#s), momentary, and pulse options of both TIP and RING switches.
Controls: 4 Dip Switches for MIDI Channel
LED: Blue & Red LED Indicators for Tip & Ring, Power LED, MIDI Send/Receive LED
Inputs: MIDI In
Outputs: 1x 6.3mm TRS, 1x MIDI Thru
Power Supply: 9V DC (Sold Separately), Center negative pedal connector, Note: No Battery Operation
Current Consumption < 12mA @9VDC
Dimensions (WxDxH): 32 x 93 x 39 mm
Weight: 114 g