EMG MMTW Bass Pickup
- Helsinki Store In stock
- Warehouse In stock
EMG MMTW includes two independent pickup tones. One is a ceramic and steel humbucking pickup that gives players an incredibly rich bass tone. The wide spread bobbins combined with a large coil surface gives this mode a big bass sound. In the single coil mode, via a push/pull pot, the MMTW becomes EMG’s J pickup, with detailed presence and a strong mid-range character. EMG's active preamp makes either mode rich with harmonic content and whisper quiet. This is a great alternative to the stock Music Man pickup and it comes with EMG's solderless wiring and pots.
When using two of TW Pickups in the same instrument it is not recommended that EMG BT or BQ Systems be used. Each pickup requires a push/pull pot for switching from single coil to humbucker, so the balance control included with the system can't be installed. If you want to use the balance control, consider switching single/dual coil outputs with a DPDT toggle switch(s) instead.
Manufacturer's Note: Make sure to check the instructions for pickup measurements before purchasing to compare your existing pickups with EMG models.
Includes:
1x EMG MMTW Pickup
1x 25K Volume Pot
1x 25K Push/Pull Tone Pot
1x Battery Bus
1x Stereo Output Jack
1x Pickup Cable
2x Connect Cables
1x Battery Cable
1x Output Cable
Mounting Screws
Specifications
Active Dual Mode 3-Coil Bass Pickup
Music Man Dimensions
For 4-String Basses
Ceramic & Steel Magnets
Resonant Frequency: 3.50 / 2.50 kHz
Output Voltage (Finger, Thumb): 1.00 / 2.00
Output Voltage (Thump): 3.00 / 4.50
Quick Connectors
Black Cover
Brand | EMG |
---|---|
Strings | 4 |
Type | Single Coil, Humbucker |
Active / Passive | Active |
Position | Bridge, Neck |
Dimensions | Music Man |
Magnet | Ceramic, Steel |
Output | Medium |
Noiseless | Yes |
Cable Type | Quick Connect |
Cover & Color | Black Cover |