EMG RT Rip Tide Set Black Chrome Bass Pickups

EMG RT Rip Tide Set is a Robert Trujillo signature bass pickups set with great punchy sounds and stylish looks. Robert Trujillo has been using the EMG J Set since before his days in Metallica. And now he is truly metal, trusting his original tone combined with a modern look. Because of these custom stainless steel caps, these pickups maintain their original sound used in the industry for decades.

These pickups are designed for traditional 4 string jazz bass spacing and are suitable for narrow 5 string instruments. They come with EMG’s solderless wiring harness for a standard volume, volume tone setup.

Make sure to check the instructions for pickup measurements! The shorter housing (SJ) is for the neck pickup, while the longer housing (LJ) is for the bridge pickup. Each of the housings also have different mounting hole distances. Both SJ and LJ housings can work with both 4 and 5-string instruments, but you should check the width of your strings against the magnet dimensions above to make sure there is sufficient string coverage. A rule of thumb for any pickup is that the total magnet width should be the string width plus twice the distance the pickup is from the strings. So, If the pickup is 3/16” (5mm) from the strings, with a magnet width of 3.10“ (78mm) the maximum string width would be 2.72” (69mm).

Includes:
1x EMG RT Rip Tide SJ Neck
1x EMG RT Rip Tide LJ Bridge
1x Trujillo EMG Pick
2x 25K Volume Pot
1x 25K Tone Pot
1x Battery Bus
1x Stereo Output Jack
1x Pickup Cable 13.5”
1x Pickup Cable 9”
2x Connect Cables
1x Battery Cable
1x Output Cable
Adjustment Screws

Specifications
Active Single Coil Bass Pickups Set
JB size
For 4- and 5-String Basses
Housing: Neck Pickup 91.18mm (3.59”), Bridge Pickup 93.98mm (3.7”)
Ceramic Magnets
Resonant Frequency: 3.95 kHz
Output Voltage (Finger, Thumb): 2.00
Output Voltage (Thump): 4.50
Quick Connectors
Black Chrome Stainless Steel Covers