Victory Super Sheriff VS100 Kitaravahvistin

100 Watts of Classic British rock the Super Sheriff is finally here. Designed to take over from the Sheriff 44, this 100-Watt beast has all the power and gain you could ever need. Simple in design but with so much versatility. The vintage channel has two gain modes, there is the cleaner side and the crunch side, both are in the classic rock style of the late 60’s, early 70’s. The hot-rodded channel is all about late 70’s to 80’s gain and has two modes, with the second one adding even more gain!

The Super Sheriff is housed in a classic deluxe wooden sleeve. There is a presence and bass focus switch and for extra control there is a rotary knob for the bass focus on the back of the amp. As with all Victory products these are designed, and hand built in England.

2 Channels & 2 Modes

Both channels have two footswitchable modes. The Vintage channel has a clean and a crunch mode, these are based on the classic 60’s rock and blues sounds. The Hot Rod channel is the 80’s ‘hot rodded’ gain sounds, both modes have a lot of gain but mode 2 has more and is suited for lead sounds.

Simple Powerfull EQ

Plenty of tone-sculpting potential, plus presence that works in the power section to set the overall bite just how you like it.

Precense Switch

Located on the front panel, this switch changes the brightness of the presence control. Position two will sound slightly brighter as it reduces negative feedback in the higher frequencies.

Depth Focus

This is much more than a bass EQ. It works in the power section of the amp, offering either a tighter, more focused bottom end, or conversely looser and more resonant depending on your needs and tastes. The Sheriff 100 adds extra controllability with a rotary knob on the back panel.

High & Low Power Mode

100 Watts in high power mode and 35 in the low power mode.

Master Volume Design

There are two master volume controls, one for each channel and these are footswitchable.

The master volume assign switch on the back, can switch the volume controls to be set globally across channels or to their originally vintage/hot rod channel.

External Bias Test Points

No need to fiddle about inside when you change output valves. The Sheriff 100 will be fitted with EL34s as standard but can be biased to use 6L6s too, along with a range of other valves such as: KT66, KT77, 6CA7, 5881 etc.

Series Effects Loop

A series effects loop is available for effects fans. It’s completely out of the circuit when bypassed.

Features
Format: All-valve, two-channel head
Power: 100 watts RMS, 35-watt low power mode
Valves: 4 x ECC83, 4 x EL34
Extra features: Footswitchable modes ‘Vintage’ & ‘Hot Rod’ channels, ‘Volume I’ & ‘Volume II’, high and low power modes, series effects loop, depth focus, presence switch, external bias test points and adjustment. Slipcover included.
Size (WxHxD): 480 x 235 x 235 mm
Weight: 16 kg